aftermarket water temp gauge, 2010 hyundai accent

• 2023-04-05

Our aftermarket water temp gauge can be used on different cars , such as 2010 hyundai accent . The normal water temperature signal is mostly around 95 ℃ (for high-temperature engines, it is around 115 ℃). If an abnormal signal is found from the water temperature sensor, maintenance should be carried out. For example, if the water temperature signal displays -40 ℃, it indicates an open or short circuit in the negative electrode. If there is no change at 130 ℃, it indicates a short circuit in the positive electrode (some cars may display it at 140 ℃). 

When we have a aftermarket water temp gauge and encounter an alarm of high water temperature, we can immediately observe the situation and should start slowing down before driving to the roadside. We don't have to rush to shut down the engine. Because the 2010 hyundai accent water temperature is too high, the temperature of the piston, steel wall, cylinder, crankshaft, etc. It will be too high, and the oil will become thinner and lose its lubrication function. If the engine is turned off at this time, the parts are basically in an expanding state, and the gap between the accessories is very small. After shutdown, it may cause some soft metals to fall off, and some may even cause cylinder sticking. Therefore, after the boiler is turned on, it is not necessary to immediately shut down the engine, but to temporarily maintain idle speed and try to cool down as much as possible. 

The easiest way to determine if the antifreeze is insufficient is by opening the engine hood and checking the amount of antifreeze. If the antifreeze level is below the 'minimum' line, then there is already too little antifreeze. If the 2010 hyundai accent engine compartment is not cleaned for a long time and there is too much ash accumulation, it will affect the poor heat dissipation of the radiator in the water tank, leading to high water temperature. In most cases, the high water temperature is caused by too much dust in the radiator of the water tank, so we can solve the problem by cleaning the dust on the radiator. If you find that the water temperature is too high during normal driving, you can open the engine hood and touch the inlet and outlet pipes of the water tank with your hand to see if there is a temperature difference