autometer water temp gauge warning light

• 2023-04-06

If the autometer water temp gauge temperature is too high, warning light comes on, it is necessary to promptly choose a shady place to park and cool down. The engine hood can be lifted for ventilation and heat dissipation; After the temperature drops, check the engine cooling system for water shortage and the cause of the high temperature. So when the driving temperature of the pickup exceeds 95 ℃, it needs to be stopped.

What should I do if the engine warning light comes on? Firstly, check the water temperature gauge and oil pressure alarm light. If the water temperature gauge and oil pressure alarm light do not alarm (the pointer type water temperature gauge should remember that the temperature should be around 95 degrees Celsius), the car can still be driven, but at this time, it is important to control the speed and drive to the maintenance station for inspection in a timely manner. If the water temperature is too high or the oil pressure alarm light is on, and if it is obvious that there is a malfunction in the vehicle, immediately pull over and call the maintenance station for assistance. 

Solution to engine warning light: 1. Clean the engine. Once an engine malfunction light comes on, the owner should clean the engine in a timely manner. Currently, there are two correct cleaning methods: (1) Go to the repair shop and use a specialized cleaning agent to clean the carbon deposits. (2) Use good fuel additives to clean the entire fuel system, including removing carbon deposits in the cylinder. 

The fact that the engine warning light is on does not mean that the engine cannot operate. Firstly, if the fault light comes on, it is necessary to check and repair it. If you happen to be near the repair station, it is better to check at any time. If you are far away from the repair station and do not have time to go to the repair station for inspection, as long as there is no obvious fault with the engine, it will lead to deviation in the control of the air fuel ratio of the engine, which is even more fuel-efficient than before. Open the oil filler to see if there is any foam or bubbles, check the water tank cap for oil, and check for white water droplets on the dipstick. Some of them are water seeping in. The cylinder gasket needs to be replaced.