English 
boat fuel gauge not reading correctly
The main reason for the not correctly reading of the boat's oil fuel gauge is that the oil level sensor fails. Generally, the inaccuracy of the scale of the oil gauge will cause the scale display to be fast and slow , causing the driver to be unable to correctly observe the scale of the car's oil gauge , which needs to be repaired or replaced in time .
The boat fuel position sensor has poor contact or the sliding resistance is severely worn . Abnormal circuit or aging of electrical components; Abnormal deformation of oil tank or support . Virtual connection and open circuit in the engine; The grounding wire of upper oil level sensor and oil pump harness is loose . The fuel gauge consists of a fuel level indicator with pressure regulator and a fuel level sensor . Its function is to give an alarm immediately when the oil volume in the tank is lower than the specified value , so as to draw the attention of the boat driver . The boat fuel gauge is used to indicate the amount of fuel in the car fuel tank. It can be a pointer or a digital display .
First, make sure that the boat is filled with fuel oil. If the fuel gauge is still inaccurate, you can use repair tools for debugging. The sensor and equipment are also the reasons that affect the inaccuracy of the oil gauge. Equipment failure will also lead to the inaccurate reading of the oil gauge pointer, which can only be handled by the professional debugging equipment of the repair factory. Display problems, clean and wipe the boat fuel gauge, or maintain it through a professional repair shop. Regularly and regularly check the boat fuel gauge, and purchase professional cleaning tools for treatment. The cleaner needs to have professional knowledge. Professional cleaning.
The boat fuel gauge sensor of the ship may be dirty, because the fuel gauge sensor is always immersed in the fuel tank, so if the immersion time is too long or the fuel quality is relatively poor, it is easy to make the sensor surface adhere to sludge or other dirt. The solution to this problem is relatively simple. The boat fuel gauge sensor can be removed for cleaning and adjustment. If it needs to be replaced, it should be replaced in time.
Get a Quote / Info