English 
boat water level gauge
Marine boat yacht, speedboat, automobile, RV, refitted vehicle, water tank water level gauge . The automatic identification of pointer instrument provides an effective technical means for real-time monitoring and information management of boat .
Most marine or boat water level gauges are magnetic float level gauges, which take the magnetic float as the sensing element and reflect the measured liquid level or interface through the coupling between the magnetic float and the magnetic body in the display color bar. The magnetic float type liquid level gauge forms a connector with the measured container to ensure that the liquid level between the measured container and the measuring pipe body is equal. When the float in the measuring tube of the liquid level gauge changes with the measured liquid level, the magnetic body in the float acts with the magnetic body in the color code displayed on the display bar to turn it over. Red indicates liquid and white indicates no liquid, so as to achieve the purpose of accurately displaying the liquid level on site. Local display magnetic float type liquid level gauge has the advantages of intuitive and eye-catching display, no power supply, convenient and reliable installation, small maintenance and low maintenance cost. It is an upgraded product of glass tube and glass plate liquid level gauge. It can be widely used in the liquid level detection of automobile, ship and other industries. Users can also cooperate with the magnetic control liquid level gauge according to their needs. It can be used for local digital display or output 4 ~ 20mA standard remote transmission electric signal to meet the needs of recording instruments or industrial process control. It can also be used with magnetic control switch or proximity switch to monitor and alarm the liquid level or control the liquid inlet and outlet equipment.
When receiving the boat water level gauge, the user shall carefully check whether the product is damaged during transportation and whether it is consistent with the order requirements. After inspection, it shall be installed accurately according to the following sequence Float and measuring tube are packed separately. Remove the bottom flange, keep the top of the float upward, install the float into the measuring pipe, and install the bottom flange. Then it is connected with the tested container. The magnetic body in the float acts with the magnet in the color bar on the display board. The color code is reversed. Red indicates liquid and white indicates no liquid. Note that the float should be handled with care to avoid damage; Before installation, the float of the display bar must be adjusted to white to avoid affecting the reading.
Get a Quote / Info