English 
how to remove speedometer cable from cluster
Speedometer disassembly:
During the use of the vehicle, the odometer pointer does not move, the mileage counter does not move, or both the pointer and the counter do not move when the vehicle is running. In some cars, the counter gets stuck and stops at the "099999" position. Therefore, the odometer needs to be disassembled and repaired. If necessary, the odometer needs to be replaced. Disassemble the odometer as follows:
(1) Unplug the harness plug connecting the odometer and the instrument rear housing, remove the fastening screw on the white baffle at the rear of the odometer, and then remove the fastening screw fixing the odometer from the front and remove the odometer.
(2) Use pointed nose pliers to take the fixed crossbar of the counter limit gear out of the limit slot, turn the counter display disc several times by hand, adjust the counter to "100000", and install the fixed crossbar back to its original position.
Disassembly steps of automobile instrument panel:
1. When disassembling the vehicle, first remove the panel strip at the button on the host, and then remove the panel around the host.
2. Use dark force to pry out the panel from below. When taking out the panel, take out the clips left on the plastic plate of the original vehicle.
3. Be careful not to break or fall into the instrument panel; Try not to pull the long cable behind the main engine, and pay attention to arranging the harness behind the main engine. Because the position of the original main engine is relatively small, there will not be enough space to install the main engine if the cable harness is not arranged properly. Disassembly and precautions of the combination instrument ① When disassembling the combination instrument, remove the negative battery cable first to avoid short circuit when touching the back of the instrument panel. ② When disassembling the trim panel of the combination instrument, as the fixing screws are generally concealed, carefully find the fixing screws, otherwise the trim panel will be damaged if forcibly disassembled.
③ When disassembling the instrument and sensor, be careful not to knock. ④ The wiring between the instrument and the sensor and the grounding of the sensor must be reliable. 5 The terminals of electromagnetic instruments have different polarity, and should not be connected incorrectly. Dismantle the central armrest box first, then the central air outlet, and then the instrument panel: first remove the three switches with bolts behind them, and finally remove the instrument panel.
The automobile instrument panel is a device that reflects the working conditions of various vehicle systems. Common indicators include fuel indicator, detergent indicator, electronic accelerator indicator, front and rear fog indicator and alarm lamp.Different cars have different instruments. But the conventional instruments of ordinary cars include speedometer, tachometer, oil pressure gauge, water temperature gauge, fuel gauge, charging gauge, etc.
Get a Quote / Info