manual oil and water temp gauge install on ls1

• 2022-11-16

Ls1 water temp gauge: when installing the water temperature gauge, connect a ground wire from the screw on the water temperature tee to the body ground. Ls1 oil temp gauge/oil pressure gauge: after installing the ls1 oil temp gauge or oil pressure gauge, if the pointer cannot reach the top, it is also necessary to connect a ground wire on the inductor to the body ground.

The ls1 water temp gauge can be used to indicate whether the working temperature of the cooling water in the engine water pump is normal. It consists of a water temperature indicator mounted on the instrument panel and a water temperature sensor mounted on the engine cylinder head water pump (commonly known as the greenhouse). The function of automobile instrument is to help the driver master the working conditions of the main parts of the automobile at any time. The automobile repair shop should be responsible for maintenance, repair and use of new batteries, etc. The heating and ventilation device, electric seat moving mechanism, and the generator are the power supply of electrical appliances. The function of the battery is. Speedometer is an instrument used to indicate the driving speed and accumulated mileage of a car. It consists of speedometer and odometer. The most commonly used is the electromagnetic ammeter, which simplifies the circuit and has a good effect. Some foreign premium cars use electronic heaters.

What are the signs of water temperature and oil temperature? Ordinary cars only have water temp gauges and water temperature warning lights, while ordinary cars do not have oil temperature gauges and water temperature warning lights. The sign of the water temperature warning light is that there are two wavy lines below , and a thermometer is inserted in the wavy line . Most cars use water-cooled engines, which rely on the continuous circulation of coolant to dissipate heat . There are two circulation paths for coolant in the engine , one is large circulation and the other is small circulation. When the engine is just started , the engine temperature is relatively low and the amount of coolant circulation is small . Therefore , the coolant will not dissipate heat through the radiator tank, which is conducive to rapid engine temperature rise . At this time , the coolant will dissipate heat through the radiator tank to keep the engine temperature within the normal range .