marine outboard gauge set

• 2023-02-07

The marine outboard gauge set , we mainly have the size 300*190mm gauge set panel. Customers can select different gauges for the gauge set.

About the gauge set of tachometer , it is used to display the marine outboatd engine speed. It can visually see and know the engine speed and remind the driver not to exceed the engine speed limit, so as to prevent the internal parts of the engine from being damaged and the driving safety from being affected by the high engine speed!

The oil pressure gauge is used to display the pressure of the oil circuit. By observing the oil pressure gauge, you can know whether there is leakage in the oil circuit and whether the pressure is too high. So as to ensure the normal operation of the oil circuit. When refitting the oil pressure gauge of the outboard engine, it is necessary to install a tee at the engine oil pressure alarm light sensor, install the alarm light sensor and the direct oil gauge pipeline interface at the tee connector, and then install the direct oil gauge at the appropriate position in the cab. When checking the pressure of the fuel system, first install the fuel pressure gauge (referred to as the oil pressure gauge) as required; The oil pressure gauge can be installed at the fuel pipe joint of the gasoline filter and the fuel inlet joint of the fuel distribution pipe, or connected to any part of the fuel pipe with a tee joint for easy installation and observation.

What is the reason why the water temperature of marine diesel engine is too high? The diesel engine used for construction machinery generally has a high working temperature. Filling antifreeze can ensure its high boiling point and reduce scale in the cooling system; If any air in the cooling system is not discharged or the coolant is not replenished in time, the cooling performance will be reduced and the coolant temperature will be increased. Remove the air from the cooling system. For example, the fins of the water radiator collapse in a large area, and there are oil sludge and sundries between the fins, which will block the heat emission. Especially when the surface of the water radiator is stained with oil, the thermal conductivity of the oil sludge mixture formed by dust and oil is smaller than that of the scale, which seriously hinders the heat dissipation effect.