English 
universal motorcycle speedometer install
How to install motorcycle speedometer:
Stopwatch adjustment and installation instruction sheet, reinstall it, cover the back cover, the first step is to open the back cover of the stopwatch with a coin, take out the battery, and restore the factory value to 2060, then press the right button to adjust the number, and the displayed speed is the time .
Motorcycle replacement speed line:The engine tachometer of a motorcycle does not require maintenance, and it cannot be repaired. If there is no problem, just ignore it. If it is broken, just replace it.
How to install electric vehicle speedometer:
1. Open the engine compartment cover, loosen the air filter cover, loosen the throat hoop of the throttle intake duct, and remove the entire engine intake duct and filter cover from the engine compartment. The purpose of this is It is convenient to reach out to the position of the speed sensor, and it is convenient to remove the plug of the speed sensor and the fixing bolt.
2. Disassembly of the buckle and plug of the speed sensor: Pry out the elastic buckle of the speed sensor with a small screwdriver to one side, and pull out the plug of the speed sensor. Only the plug of the speed sensor is pulled out first, and the fixing bolt of the speed sensor won't be blocked.
3. For the final disassembly of the speed sensor, you can use a ratchet wrench and a universal sleeve adapter. Since the universal adapter can change the angle of force, it makes disassembly more convenient. Of course, if the hand is small and long enough, you can directly It is also possible to use a suitable Torx wrench.
4. Just loosen the fixed bolts and shake the sensor socket to take out the speed sensor. Here, it is especially important to remind that after the speed sensor is disassembled, there will be a hole leading directly to the inside. This hole should be temporarily blocked to prevent small objects from falling into it. inside the gearbox.
5. For the installation of the vehicle speed sensor, put some lubricating grease on the sealing O-ring of the vehicle speed sensor. This is to facilitate the smooth pressing of the vehicle speed sensor in place. After pressing the sensor in place, tighten the fixing bolts and plug the vehicle speed sensor Insert it to the end, and press the elastic buckle to lock it tightly. Since this buckle is small and hard to buy, please be careful not to lose it accidentally. Next, restore the installation of other components, and the replacement of the vehicle speed sensor is complete.
6. The vehicle speed sensor is a sensing device used to detect the vehicle speed. The driving computer ECU uses various signals including the vehicle speed sensor signal to control the engine idle speed, the torque converter lock of the automatic transmission, the shift logic, and the engine. Cooling fan switch, cruise control and other functions, if the vehicle speed sensor is damaged, it will have a greater or lesser impact on the operation of the car engine and normal driving.
Get a Quote / Info