English 
vw beetle speedometer not working
VW beetle speedometer not working: When an exclamation mark is displayed on the dashboard of a car, it means that the vehicle may be malfunctioning and needs to be dealt with in time. First of all, you should check the oil quantity, water temperature, battery voltage, etc. of the vehicle to determine whether there is any abnormality. If nothing abnormal is found, you can try to restart the vehicle to see if the exclamation mark can be eliminated. If it still cannot be eliminated, the vehicle should be sent to a professional auto repair shop for inspection in time to determine the specific cause of the failure and repair it. In addition, in daily driving, you should pay attention to the maintenance of the vehicle, regularly check the various parts of the vehicle, and replace gasoline, engine oil, air filter, etc. in time to ensure the normal operation of the vehicle. In addition, you should also pay attention to the driving status of the vehicle, find out the abnormal situation of the vehicle in time, and deal with it in time to avoid situations such as exclamation marks.
If the car shows Immediately carry out the vehicle condition inspection reminder means that the car needs to be maintained in time when the car reaches the maintenance cycle. Car owners can go to 4S if they want to eliminate the reminder. Just reset the car maintenance settings after car maintenance in the store. The method to eliminate the reminder of immediate vehicle condition inspection is: turn on the double flashing lights, then press and hold the button on the right side of the instrument panel, and then use the key to turn on the power or One-button start and turn on the power, you can see the setting and clear it without starting the ignition.
The correct way to turn off the Volkswagen maintenance indicator light:
1. Turn off the ignition switch.
2. Then press and hold the mileage while turning on the ignition switch the watch hour reset button, after ignition, the prompt information is still displayed.
3. Press and hold the odometer hour reset button for about 3 seconds within 30 seconds, and the prompt message will be completely cleared. If the operation is not performed according to the requirements or the operation is wrong, and the information cannot be eliminated, it should start from the beginning. Two: 1. Turn off the ignition switch.2. While pressing the clock adjustment button "SET", turn on the ignition switch. 3. Release the "SET" button and press the "SET" button again.
4. Turn off the ignition switch, turn on the ignition switch, and see if it returns to zero. If not, it must be done from scratch.
Get a Quote / Info