water temp gauge installation

• 2022-02-25

Let us show you, how to install the vehicle water temp gauge. The body of the water temperature gauge is self luminous on a white background, which is more suitable for observing the water temperature at night. The harness of water temperature gauge has 4 wires in total, one of which is 3 wires. It focuses on the four wire instrument. The four wires are red (key 12V), black (ground wire), blue (signal wire), white (power on the small lamp), and the three wires are short of white lighting wires. First find the water supply pipe of the car. The general position is very obvious, which can be easily seen by the owner. Then cut the opening at the appropriate position, and the length should be close to the length of the tee. In this way, the tee can be installed into the water supply pipe and fixed with the latch. At the same time, screw the sensing head on the small mouth. Finally, this step can be ended by applying sealant to the gap.

Then, the owner should thread the wire of the water temperature gauge from the left part of the driver's seat to the engine compartment and connect it with the sensor. At the same time, the wire of the water temperature gauge is respectively connected with the wire in the middle of the cigarette lighter and the other two, so as to form a loop with it. The owner can automatically cut off the power after pulling out the key, which is very convenient.

The added water temperature sensor has an added aluminum alloy sleeve, which is suitable for mounting holes with different threads.Install the aluminum seat for the water temperature sensor, cut off the water pipe of the original vehicle, install the aluminum seat, connect the water temperature sensor, and pay attention to connecting the ground wire.

So far, the installation of the car water temperature gauge has been completed. However, after the car is mainly equipped with the car water temperature gauge, observe the working state of the machinery at any time in the early stage. If the temperature reaches about 99 degrees, the electronic fan will not start. The owner will quickly turn off the engine, open the cover of the machine, have a rest and wait for a buffer time.Also, the vehicle/car/or other needs regular maintenance, otherwise it will affect the performance of the car.