water temp sender location 64 chevelle gauge

• 2022-09-20

Most cars include 64 chevelle water temp gauge senders location is at the thermostat behind the cylinder head. The thermostat is located along the water inlet pipe to the cylinder head connector, where the water temperature sensor is located. Although there are many types of vehicles, their structures are much the same . This should be said to be the result of standardization , but also the need for large-scale production lines . With the development of society , the progress of science and technology and the change of demand , the appearance of railway vehicles has begun to change , especially the passenger car is no longer the same old face . However , their basic structure has not changed significantly , but the specific parts have more scientific and advanced structural design.

64 Chevrolet's water temperature sensor is installed on the water channel and water tank of the car . First , pull the wrench in front of the Chevrolet Lefeng engine hood to open the Chevrolet Lefeng engine hood . After opening the cover of the Chevrolet Lefeng engine compartment , use the bracket to support the engine compartment cover . After opening the engine compartment cover, the engine compartment water temperature sensor can be found at the position shown in the engine compartment diagram . The location marked by the red arrow is the water temperature sensor of Chevrolet Lefeng.

When the 64 chevelle water temp gauge sensor fails , it usually displays the temperature signal when the engine is cold . The ECU can only supply the thinner mixture of the engine (the signal when the engine is hot) , so it is not easy to start the engine when the engine is cold. In this case , check whether the water temperature sensor plug contacts normally or replace the water temperature sensor .

For example, when reading the data of the static engine of the vehicle (referring to the cold car) , it is found that the coolant temperature output by the engine ECU is 105 ℃ , while the actual temperature of the engine at this time (set as the temperature in winter) is only 1 ℃ . It is obvious that the water temperature signal received by the engine ECU is wrong , indicating that there is a problem with the water temperature sensor .