English 
autometer pro comp fuel level gauge
Checking the auto meter pro comp fuel level gauge is a warning sign, indicating that the engine fuel level is abnormal. The computer detects that the fuel level is low, indicating a lack of fuel or a damaged fuel level sensor. When checking the fuel level, the fuel dipstick should be checked while the vehicle is turned off. There are two scales on the dipstick, one is the highest scale and the other is the lowest scale. The normal fuel quantity should not be higher than the lowest scale or lower than the lowest scale, and between these two scales is normal.
The following are the specific inspection methods:
1. Find the fuel dipstick.
2. Pull out the fuel dipstick.
3. Wipe the dipstick clean with a tissue and insert it back in. The dipstick needs to be inserted to the bottom.
4. Observe the fuel dipstick. If the fuel dipstick is between the upper and lower lines, it is normal and there is no need to add fuel.
How to check the oil level 1. When the engine oil level is between the upper and lower lines of the oil dipstick, it can ensure the normal operation of the engine and related components. The scale mark at the end of the ruler is incorrect after a few minutes of shutdown, although most of it is oil.
The method to check the oil level of a car is: 1. Park the car on a flat road surface, pull out the dipstick, 2. Wipe off the dipstick, reinsert it into the oil hole, 3. Confirm that there is no oil, insert it to the bottom, and then pull out the dipstick. Check that the engine oil is an engine lubricating oil, which is used to relieve friction and cool and clean at high temperatures.
Check the oil level after parking for a period of time, and then check again. Regardless of the shape of the car's engine oil pan, the position of the oil dipstick is fixed, which means that the oil quantity is fixed. The specific inspection method for the liquid level at this position is to 1 find the dipstick 2 and pull out the dipstick 3. To check the engine oil of a car, simply turn off the vehicle and use an oil dipstick to check. The specific operation steps are as follows: 1. Open the cab door 2. Pull the hood switch on the left side of the driver's leg 3. Lift the hood 4. Pull out the oil dipstick and wipe it clean 5 Insert it.
Get a Quote / Info