harley breakout lcd oil temp gauge

• 2024-01-05

There are two situations, one is that the brake light bulb is broken. One of the front and rear brake switches is broken. Firstly, check the brake light bulb and replace it if it is broken. Secondly, check the brake switch again. The brake switch is in the normally open state. When the brake pedal is pressed, the brake switch will enter the normally closed state and turn on the brake lights. The front brake switch is also based on this principle. If the fault is found and resolved, it will be fine.

What's wrong with the oil gauge light not working: Gear oil specially used by Gahale.

How to maintain a motorcycle?

1. How to maintain the motorcycle during normal driving: oil change cycle: if Semisynthesis oil is used, the change cycle is generally 3000 km. Running to the limit of 4000 kilometers is also possible, but to ensure the engine's longevity, I suggest changing the oil every 3000 kilometers. Every time you change the oil, inject about 100 milliliters of residual oil into the exhaust funnel.

2. Selection of gasoline: Try to refuel at large refueling points operated by local petrochemical companies, and try to use 93 gasoline with carbon removal. Don't wait until the oil is completely used up before refueling, because stalling the engine due to a lack of oil can seriously damage the machine!

3. Cleaning of the air filter, carburetor, and engine oil filter: Every 3000 kilometers, that is, every time the engine oil is changed, the air filter (if it is paper, it can only be changed) and the engine oil filter core must be cleaned.

4. Clean the carburetor every 6000 kilometers, which is when changing the engine oil every other time. Chain maintenance: Check the condition of the chain every 500 kilometers to see if it is loose or lacking oil.

5. Disassemble the chain every 5000 kilometers, clean it, and then oil it for maintenance. Maintenance of the car shell: After the car is dirty or caught in rain, it needs to be cleaned because the rain is acidic and highly corrosive to metals and plastics.

6. After washing the car, apply a layer of wax, which can more or less resist the damage of acid rain and the sun. Engine maintenance: add anti-wear agent when changing the second bottle of Semisynthesis engine oil during the normal driving phase when the kilometer meter is 6000km away, so as to ensure that the service life of the engine can be extended and the service performance of the locomotive can be improved.

7. It is recommended to use the anti wear agent brand "Jinchiba". Precautions for electric ignition: When the power is turned on, each time the electric start button is connected, it should not exceed 3 seconds. If it is not ignited at one time, it should also be ignited at least 10 seconds before the second time.

8. After five repetitions, don't use electric ignition anymore. Try other methods. If not, check the condition of the car. Precautions when starting a cold car: When the engine is cold, turn the car on and slightly shake the throttle. The engine speed should not exceed 2000 rpm. After 30 seconds, shift into gear and move forward. The speed for the first 1 kilometer should not exceed 40 kilometers per hour. If it is winter, preheat for 1 minute. During the preheating period, pinch the clutch and front brake for about 10 times to completely reset the hydraulic oil in the clutch and disc brake.

9. Other maintenance: The battery should be checked every month to see if it is running low. Every day when cycling, check whether the brake system is in good condition, and whether the steering and brake lights display normally.