high visibility temp and oil gauge

• 2022-11-17

The operating temperature necessary for the normal running of the automobile engine, which is too high or too low, is basically not conducive to the normal running and performance of the engine. On the other hand, the heat generated by engine operation is difficult to meet the needs of conventional air cooling, so the water-cooled heat conduction design has been widely used in automotive engines. The purpose of the cooling system is to keep the engine within the most favorable temperature range. The operating temperature necessary for the normal running of the automobile engine, which is too high or too low, is basically not conducive to the normal running and performance of the engine. On the other hand, the heat generated by engine operation is difficult to meet the needs of conventional air cooling, so the water-cooled heat conduction design has been widely used in automotive engines. The role of the cooling system is to keep the engine working in the most favorable temperature range, so as to increase the engine power and reduce engine wear and fuel consumption. Too high or too low temperature will basically have an adverse effect on engine operation.

High visibility temp and oil gauge:The temperature of the engine antifreeze is not as low or as high as possible. Within the necessary range, the normal temperature is 90 ℃ at the center of the pointer. After the car starts, the coolant temperature rises rapidly. After the pointer reaches the center position, the coolant temperature in the heat exchange balance will not increase further. In many cases, the starting effect is best when the temperature reaches the middle position, which is also one of the reasons why automatic starting used to require preheating the car.

How to check: &Diams leakage and insufficient antifreeze

After the cooling system leaks, the shortage of coolant will be affected, thus affecting the temperature rise of coolant. If the coolant is found to be too low, we should start checking for leaks. If it is not necessary to add a similar type of coolant immediately, tap water or other types of coolant are not required to be added, so as not to affect dilution or even sedimentation, causing failure or failure.

&Diams cooling fan fault:
The failure of the cooling fan will affect the heat transfer of the coolant at high and medium speed of the automobile engine, will not immediately dissipate heat, affect the rise of the coolant temperature, and then affect "boiling" and other issues. During driving, pay attention to the temperature of the coolant. In case of any abnormality, slow down and stop first, but do not stop to check whether the cooling fan and circulating water pump have faults.