motorcycle gps speedometer tachometer

• 2022-05-06

The tachometer unit is 1 / min × 1000, which shows how many thousand revolutions the engine rotates per minute. The tachometer can visually display the speed of the engine under various working conditions. The driver can know the operation of the engine at any time, cooperate with the transmission gear and throttle position to keep it in the best working state, which is good for reducing fuel consumption and prolonging the service life of the engine.

The tachometer indicates the speed of the engine. There is one below × 1000 indicates that the number of revolutions pointed by the pointer at that time is thousands of revolutions per minute. Experienced people can better master the working state of the engine and better control the number of revolutions of the engine. Generally, the speed of small displacement engines is controlled below the red line of 10000 revolutions per minute.

The corresponding number under the short vertical line in the circle of the motorcycle odometer is the speed value, and the Yellow pointer indicates the current speed of the motorcycle. There are two groups of numbers in the odometer. First look at the above group of numbers. This group of numbers can be cleared manually. The currently displayed number is how many kilometers have been traveled since clearing. There is a rotary knob on the left side of the odometer. Rotate this knob to clear this group of numbers. Looking at the speed per hour should be looking at the pointer during your riding. Generally, motorcycles have two pointer meters, one is the engine tachometer and the other is the GPS speedometer. The GPS speedometer (speedometer) is the one with two lines of numbers. When the pointer points to 50, it means that your speed is 50 km / h.

Looking at the speed per hour should be looking at the pointer during your riding. Generally, motorcycles have two pointer meters, one is the engine tachometer and the other is the speedometer. The speedometer (speedometer) is the one with two lines of numbers. When the pointer points to 50, it means that your speed is 50 km / h. However, some motorcycles only have a pointer meter, that is, only a speedometer without an engine tachometer.

For the running in and maintenance of the engine, the lubricating oil with good quality should be selected. Secondly, various operations such as oil supply, starting, shifting and braking should be slow and slow; Finally, the engine speed should be controlled at 2000-3000rpm (gasoline engine), and the automatic gear should preferably be controlled below 3000rpm. If the engine speed is high, some parts will be strained, and if the speed is too low and the gear is too high, the parts will be worn.