what side of the dash is the water temp gauge on a farmall m tractor

• 2023-08-16

What side of the dash is the water temp gauge on a normal m tractor? The water temperature gauge is on the left. Water temperature gauge: displays the engine coolant temperature, with a range of 40-120 ℃. When the pointer points to the yellow zone, the engine coolant temperature is between 40-60 ℃; When the pointer points to the green zone, the engine coolant temperature is between 60-100 ℃; When the pointer points to the red area, the engine coolant temperature is between 100-120 ℃. If the engine coolant temperature is too high, it should be immediately shut down for maintenance. 

If the working water temperature is around 60 degrees, it is considered normal. If the temperature is too high, it has a temperature control switch, so it won't start and stop working. The water temperature gauge is used to indicate the temperature of the engine coolant. The scale unit of the water temperature gauge is Celsius. When the engine starts, the indication on the water temperature gauge should not be less than 50 ° C; When the car is running normally, the normal reading of the water temperature gauge should be between 70 ° C and 90 ° C. The main inspection items are to avoid a fire during the operation. If there are many crop debris or dirt attached to the lighting area, inside each belt cover, engine, muffler, battery, pulley, fuel tank, electrical wiring, or the dust net of the dust cover, please immediately clean the area around the engine. Please shut down at least 3-5 times during daily work for inspection to remove crop debris and dirt (pay attention to burns in high-temperature areas). Correct use of fire extinguishers (method to determine the effectiveness of fire extinguishers: the pressure gauge pointer is in the green area, otherwise it should be refilled or replaced). 

The common instruments on the tractor instrument panel are Ammeter, oil pressure gauge, water temperature gauge, signal device instrument, etc. The water temp gauge need to match the water temp sensor. We can supply all kind of the farmall m tractor gauges . A water temperature gauge is important because without it, it is impossible to understand the level of water temperature during engine operation and whether the water temperature in the water tank is abnormal at this time.