bmw z4 fuel level sensor location
The bmw z4 fuel level sensor is generally attached to the fuel pump assembly and installed on the fuel tank. However, the fuel pump assembly and the fuel level sensor of individual models are separate. In any case, this thing is installed on the fuel tank.
The fuel level position sensor includes a sensor head fixed with an oil inlet pipe and a circuit pipe . The sensor head is also fixed with a circuit connection terminal . A bolt is arranged in the middle of the sensor head , and a locking piece is connected at the lower end of the bolt . The locking piece is located below the sensor head . The beneficial effect of the utility model is that the sensor head is locked and fixed on the oil tank through bolts and locking plates , and the connection and sealing with the oil tank are firm and reliable .
How to reset the oil level sensor if it is replaced ? When the key is turned on, there is no need to start . Press and hold the left button on the instrument . It comes loose when the oil symbol is displayed on the instrument . Press again, there will be rest . Just press again . Only normal oil pressure can ensure that the oil is delivered to all friction parts of the engine . If the oil pressure is too high or too low , it will affect the normal operation of the engine and even cause damage to engine parts . Therefore , when the oil lamp gives an alarm , stop the machine immediately to find out the cause , and continue to work after the fault is eliminated .
The oil quantity of the engine oil is insufficient , so that the oil quantity of the engine oil pump is reduced or the oil cannot be pumped due to the air intake, resulting in the decrease of the oil pressure . If the engine temperature is too high , it is easy to dilute the oil , and a large amount of oil will be lost from the fitting clearance , resulting in a drop in oil pressure . When the parts of the oil pump are damaged or the clearance is too large due to wear , assembly and other problems , the oil pump will fail to deliver oil or not deliver enough oil.
Get a Quote / Info