engine mount water temp gauge autometer

• 2022-09-03

Vehicle marine engine autometer can be mounted with water temp gauge . First of all, the owner had better find the water pipe of the car first. The general position is very obvious, and the owner can easily see it. Next, cut the opening at the appropriate position, and the length should be close to the length of the tee. In this way, the tee can be installed into the water pipe and fixed with the lock catch. At the same time, the sensing head can be screwed on the small mouth. Finally, this step ends with applying sealant to the gap .

Then, the car vehicle or marine owner needs to thread the wire of the water temp gauge from the left side of the driver's seat to the engine compartment and the sensor. At the same time, the wire of the water temp gauge is connected to the wire in the middle of the cigarette lighter and the other two, so that it can form a loop with it. After the car owner pulls out the key, it can also cut off the power automatically, which is very convenient .

So far, the installation of the vehicle marine engine autometer water temperature gauge has been completed. However, after the installation of the vehicle marine engine autometer water temperature gauge, the vehicle or marine mainly observes the mechanical working state at any time in the early stage .

Many drivers have been used to the existence of water temperature meters. Nowadays, many vehicles can't accept changing to water temperature lamps. A large part of the reason is that they can't check the water temperature. You can add a water temperature meter, which is simple and convenient .

During the operation of the autometer engine, the temperature will not be too low, so the temperature of the water circulation system of the engine is not the lower the better, but the normal working state is within a certain temperature range. When the vehicle is running normally, the temperature of the antifreeze will also rise with the temperature of the engine. But after the pointer of the water temperature gauge reaches 90 ℃, because of the heat exchange balance, the temperature of the antifreeze will not rise again. Therefore, the best operating state of the engine is when the temperature reaches the central position of 90 ℃ .