English 
ford oil pressure gauge
The inspection method of Ford Focus oil dipstick is as follows:
1. Turn off the car engine and wait for the engine to cool down slightly.
2. Pull out the oil dipstick and wipe it with a clean, lint free soft cloth.
3. Insert the oil dipstick again and pull it out to check the oil level.
4. If the oil level is lower than the MIN mark, add oil immediately.
The following is about the extension of oil dipstick data:
1. The oil dipstick is used to measure the static oil level, so as to reflect whether the engine oil storage is within a reasonable range.
2. Conventional oil dipstick will have obvious upper and lower limits, as long as the detected oil level is between upper and lower.
3.The more oil, the better. The higher the oil level, the greater the resistance of the engine.
The oil pressure of Focus shall not be lower than 100kpa under normal idling conditions, and shall be kept within the range of 200kpa to 450kpa under medium and high speed conditions. The following are the specific reasons for low oil pressure: 1. Serious oil loss: serious oil loss will lead to low oil pressure. It is necessary to confirm whether the engine has external component leakage and internal leakage and oil burning. In addition, low oil viscosity or poor oil quality can also cause. 2. Electrical component failure: check whether the oil pressure switch, engine harness and combination instrument are normal. The engine oil pressure is measured with a pressure gauge within the standard range, and there is no low oil pressure. Due to problems with electrical components, the indicator light of the combination instrument lights up to indicate that the oil pressure is too low. 3. The filter screen of the oil pump is blocked: or the internal relief valve is defective, repair or replace the oil pump.
Manual automatic transmission is adopted, which perfectly combines the advantages of manual transmission and automatic transmission, and the engine is made of all aluminum alloy. The engine oil is the lubricating oil of the engine, which can lubricate the engine, reduce friction, assist cooling and reduce buffering. Engine oil in the market is divided into synthetic oil and mineral oil, and synthetic oil is divided into full synthetic oil and semi synthetic oil.
Get a Quote / Info