gauge panel board diesel engine gauge panel

• 2022-11-16

The gauges in our gauge panel board diesel engine gauge panel can be freely selected and matched with what customers need, such as tachometer, speedometer, oil level gauge, water temperature gauge, rudder angle gauge, etc. It consists of an 85 mm large gauges and five 52 mm small gauges.

How can I get the speed on the dashboard of a small ship boat or marine ? For example, for a sightseeing boat or a motorboat on the water, how can the speed on the dashboard be measured? The obtained data are actually obtained by multiplying the engine speed by the constant (the ratio of the accurately measured engine speed to the actual propeller speed and the distance that can be navigated). Now the GPS test is more accurate. Our gauge panel board diesel engine gauge panel speedometer can choose GPS speedometer.

About the instrument marine boat gauge panel board diesel engine gauge panel gauges , the fuel level gauge is used to display the amount of gasoline stored in the fuel tank of a car. It can be displayed by pointer or number. The thermometer is used to indicate the temperature of the engine cooling water The fuel gauge consists of a fuel gauge indicator with a regulator and a fuel level sensor. The function of the low oil level alarm device is to give an alarm immediately when the oil volume in the oil tank is lower than the specified value, so as to draw the attention of the driver . The water temperature gauge refers to the water temperature. The water temperature is low when the cold car starts, and then rises slowly. Generally, the vehicle will automatically control its own temperature, so that when the engine is most efficient, the vehicle can be heated to about 90 degrees Celsius to maintain balance. The fuel gauge displays the remaining fuel in the fuel tank, roughly indicating the fuel level. When the fuel level is low, a small light will light up to remind the driver that it is time to refuel . The thermometer is the water temperature gauge. Since the engine is generally water-cooled, the normal working temperature is about 85-90 ℃. Some water temperature gauges have temperature readings, such as 60 ℃ to 120 ℃. Some water temperature gauges do not read, but only use red scale in high temperature range .