gauge panel and gauges

• 2022-10-21

Our gauge panel for boats size is 300*190mm, and the gauges can be selected , such as tachometer , speedometer, tachometer speedometer 2 in 1 gauge, fuel level gauge , voltmeter, AMP, water temp gauge, oil pressure gauge and so on. And also , we supply the compatible sensor . Also it has alarm light to show the notice . Our gauges have 7 colors light.

The four small gauges are 52mm , the big gauge is 85mm. There are generally two types of oil gauge: pointer type and digital display type. The ones with letters on them belong to pointer type, which is also the display mode of many oil level gauges nowadays. The other type of digital oil level gauge indicates the remaining fuel through the range and the light on the dial. The more mileage or number of light cells, the more fuel left. If the endurance mileage is low or the number of light bars is only 1-2, it means that the current fuel quantity is low and you need to refuel. However, the numerical type oil gauge is not accurate enough. Although the range is displayed, it only gives you an ideal range. After all, everyone has different driving habits and fuel consumption under different road conditions.

It may even display a 300 km range. As a result, due to the road conditions, the fuel ran out after driving 150 km, so you still need to pay attention to the fuel gauge occasionally. The speedometer tachometer 2 in 1 gauge , it is save the space of the gauge panel. The water temp gauge is good for checking the temp of engine , Drivers need to know the temp mostly . The oil pressure gauge is used to detect and display the oil pressure in the main oil duct of the engine, so as to prevent major failures such as cylinder scuffing and bush burning caused by lack of oil, so as to know whether the engine lubrication system works normally. The voltmeter is used to indicate the terminal voltage of the generator and the battery. The function of the ammeter is to be connected in series in the power circuit between the battery and the generator to indicate the charging and discharging conditions of the battery and the working conditions of the generator. At the same time, check the breaking and short circuit faults of the load circuit. For the load circuit where the consumed current passes through the ammeter, the ammeter can be used as the basis to check its technical status. You can select the gauges from the different usage.