English 
how to fuel level gauge on kubota l3200 tractor
How:
Check the oil level of the tractor and eliminate potential safety hazards as soon as possible. Check whether the oil quantity is normal. Second, measure whether the oil gauge is normal. If there is any problem, replace it in time. Check whether the instrument panel is normal.If It's a little old. It's probably the problem of the oil float, which is what we call the oil level sensor. Then we can check whether the plug of the oil level sensor on the oil tank is loose and whether it is oxidized and ablated; Observe whether the oil level sensor is stuck during the sliding process.
If there is no problem with the oil level sensor, it is likely that there is a problem with the oil gauge line of the instrument panel. At this time, the instrument panel should be removed, and the corresponding oil gauge line on the instrument should be aligned with a multimeter and a pin for detection.
1. The circuit is blocked or the fuse of the management instrument is blown.
2 check the sensor. Inspection method: connect the live wire of the sensor to the engine and observe the instrument. If the instrument ends, it means that the sensor fails. If it still doesn't move, you have to go to a professional automobile circuit repair to check the circuit.The tractor instrument panel is a device that reflects the working conditions of various systems of the vehicle. The common ones are fuel indicator, water tank temperature indicator, turn signal indicator, front and rear fog lamp indicator and alarm lamp, which are installed in front of the driver.
3. The existing tractor instrument panel installation structure can basically meet the daily use needs, but there are still some deficiencies that need to be improved.
4. During the driving process of the tractor, it is usually necessary to always observe the water temperature gauge, fuel gauge and code gauge on the tractor dashboard. When different drivers drive the tractor, due to the difference of body shape, their line of sight is often different. The driver may observe very hard when observing the dashboard because of the line of sight. He often ignores the road observation when observing the dashboard, which is particularly dangerous and is very easy to cause safety accidents, Therefore, there is an urgent need for a fixed installation structure of tractor instrument panel to solve the above problems.
Get a Quote / Info