installing water temp gauge chevrolet trax

• 2022-11-16

Some cars only have a water temperature alarm but no water temperature gauge. Or the water temperature gauge is broken, and a new water temperature gauge needs to be installed. Such as install a water temp gauge on chevrolet trax . If the water temperature is too high, there will be a water temperature warning light to remind the owner. If necessary, you can install a water temperature gauge by yourself.

First of all, the owner had better find the water pipe of the car chevrolet trax first. The general position is very obvious, and the owner can easily see it. Then cut the opening at an appropriate position, and the length should be close to the length of the tee. In this way, the tee can be put into the water pipe and fixed with a lock catch. At the same time, the sensing head can be screwed on the small mouth. Finally, this can be done by applying sealant to the gap. Then, the owner must put the wire of the water temp gauge from the left side of the driver's seat to the engine compartment and connect it with the sensor. At the same time, the circuit of the water temperature gauge is respectively connected with the circuit in the middle of the cigarette lighter and the other two, which can form a circuit with it. The car chevrolet trax owner automatically cuts off the power supply after removing the key, which is very convenient. So far, the installation of the automobile chevrolet trax water temp gauge has been completed, but the automobile mainly observes the working state of the machine at any time in the early stage after the installation of the automobile chevrolet trax water temperature gauge. If the temperature reaches 99 ℃ or so and the electric fan does not start, the owner will quickly shut down the engine, open the hood and rest, waiting for a buffer time.

The car chevrolet trax water temperature sensor is located at the thermostat behind the engine cylinder head. If necessary, the water temperature sensor can be replaced together with the water temperature gauge. If the water temperature gauge sensor is damaged, it will cause the water temperature gauge to remain at the same height all the time, resulting in the wrong judgment of the owner. If the water temperature sensor is damaged, it needs to be replaced in time, otherwise the driving safety of the vehicle will be affected.