English 
jeep liberty speedometer not working
The Jeep liberty speedometer not working can not be ignited when it is started. The reasons for manual operation are as follows:
1. There is no oil. We went out to rescue a car before, and the fuel gauge showed that it was below the red line, so it could not be started naturally.
2. The battery is dead. It may be caused by the headlights left on for a long time. In addition, the additional electronic components are also the cause of vehicle circuit failure. It's easy to check if the car has no power, just press the horn.
3. Wrong gear. When the automatic stop starts, the gear must be placed at P or N gear. If it is placed at R or D gear, it will not start. There are also some manual barricades that can't be started without stepping on the clutch.
Reasons for vehicle use: improper oil products, no antifreeze, excessive carbon deposition. In addition to the reasons for improper human operation, there may be motor failure, or problems with oil pump supply, fuel injection nozzle, sensor failure, etc. In case of these complex situations, professionals are required to deal with them.
First, oil products. The car owner must go to the regular gas station to refuel. When going out, you can take a gauze bag to the nozzle to filter impurities.
Second, no antifreeze was added. Some car owners add water or low-quality antifreeze to their cars. As a result, when it is very cold in winter, the whole water circuit is frozen and the engine is cracked, which makes the car water pump unable to operate, can not be started, and other parts of the engine are injured. Too much carbon deposition on the vehicle will also cause the vehicle to fail to ignite. The solution is to run at high speed frequently to reduce carbon deposition. In addition, there is also a small skill for ignition failure. Before starting the ignition, turn the key to the ON switch, turn it back, and then turn it to the STRAT switch for ignition. Let the computer run to calculate the water temperature and the appropriate intake air volume, and the ignition will be smooth.
Get a Quote / Info