English 
speedometer light on dash
1. Front and rear fog lamp indicators
The indicator light is used to display the working conditions of the front and rear fog lights. When the front and rear fog lights are turned on, the two lights are on. In case of heavy fog and other weather with low visibility, the fog lights need to be turned on. What needs to be reminded here is that the fog lamp has strong penetration ability. Do you want to turn it on if necessary. Especially in rainy days, the fog light is strong, which is easy to be refracted and reflected by water droplets, affecting the vision of drivers in front and behind, resulting in potential safety hazards
2. Constant speed cruise indicator
At present, some models are equipped with constant speed cruise device.
3. Warning lamp of electric steering system
The warning lamp of electric power steering system lights up continuously after turning on the ignition or during driving, indicating that there is a fault in the electric power steering system. The yellow indicator light is on, indicating that the steering system has partially failed, and higher force is required to turn the steering wheel. The red indicator light is on, indicating that the steering system has completely failed, and the function has failed. It requires very high force to rotate the steering wheel. It is necessary that if the indicator light goes out after restarting the engine and driving for a short time, it does not need to be sent for inspection and maintenance.
4. Tire pressure warning indicator
When the tire pressure warning light is on, it indicates that the car tire is out of gas. The reason is likely to be tire leakage.
5. Water temperature alarm lamp
The water temperature alarm lamp is used to indicate whether the coolant temperature is normal. Under normal conditions, it is off. If the coolant temperature is too high or too low, it will be on.
6. Glass water indicator
The glass water indicator is used to display the amount of glass cleaning fluid loaded on the vehicle. It is usually off. When the indicator is on, it indicates that the glass cleaning fluid loaded on the vehicle is insufficient and needs to be added. After adding glass cleaning solution, the indicator light goes out.
7. Engine fault warning light
The indicator light is used to display the working condition of the vehicle engine. When the key door is opened, the vehicle will automatically turn off after self inspection. If it is normally on, it indicates that the vehicle engine has mechanical failure and needs maintenance.
8. Battery alarm light
The indicator light is used to display the use status of the battery. If the battery indicator light is always on after startup, it may be due to the use problem of the battery, the failure of the generator to supply the battery, or the battery damage. It needs to be replaced.
9. Brake warning lamp
There are two main situations when the brake alarm light is on. One is because the brake fluid is insufficient, and the other is because the friction plate is excessively worn. No matter which kind, the owner should submit it for inspection and maintenance in time. When the hand brake is pulled up or loosened, the alarm light will also be on. In this case, just loosen the hand brake to low.
Get a Quote / Info