English 
toyota corolla digital speedometer
In fact, toyota can adjust the digital speed function through the "up and down" steering keys on the steering wheel, but the premise is that your vehicle must have a multi-function steering wheel. Now let's see how VW Bora can call up digital speed and display it on the instrument.
1. Start the vehicle and switch the "average speed, driving mileage, endurance mileage, average fuel consumption and digital display speed" to the following interface through the "up and down" steering key on the steering wheel.
2. Maybe some cars do not have the option of digital display of speed, so you need to set it in the large central control screen. The setting method is as follows: click CAR to enter the setting interface; Click to enter the combination instrument; After checking the digital speed display, the instrument will display the digital speed function.The above is how toyota calls up the digital speed instrument panel; The vehicle dashboard not only provides the driver with necessary information such as speed, speed, oil meter, but also brings different driving experience to the owner.
The Toyota Corolla instrument panel is composed of various instruments and indicators, especially the driver's warning light alarm, to provide the driver with the required vehicle operation parameter information. Such as conventional speedometer, tachometer, oil pressure gauge, water temperature gauge and fuel gauge. The speedometer and fuel meter are on the right side of the Karola instrument panel. The speedometer uses an electronic speedometer. A common way is to obtain signals from the speed sensor on the transmission. The signal processing circuit converts the pulse signal input by the speed sensor into a current signal proportional to the vehicle speed, deflecting the pointer of the ammeter to indicate the corresponding vehicle speed. On the left side of Carola's instrument panel are the tachometer and water temperature gauge, which are symmetrically placed together with the speedometer. The tachometer works according to the magnetic principle. It receives the pulse signal generated when the primary current in the ignition coil is interrupted, and converts this signal into a displayable speed value.
Illustration of the introduction of the Toyota Corolla instrument panel: the reset button can switch the odometer "ODO", the odometer A short distance odometer B "TRIPA"/"TRIPB", the current fuel consumption is in "L/100km", the average fuel consumption is displayed as "AVG", and the driving distance can continue to be "RANGE" and other information.
Get a Quote / Info