English 
tremec speedometer gear calculator
How to tremec speedometer gear calculator: 1. If the odometer is the previous mechanical meter 1, there is a small protruding knob on the instrument panel, press the knob for a while to reset the instrument panel to zero; 2. Remove the instrument panel, remove the upper cover of the instrument, and take down the pointers such as speed, oil gauge, water temperature, speed, etc; Then use a slotted screwdriver to adjust the mileage gear, which can be set back or reset.
If the odometer is the current principle of electronic meter adjustment: the odometer's kilometer data is stored in the chip of the instrument panel in the form of encryption. It is necessary to clear the location of the data in the chip, and then add the required kilometer data directly to the corresponding location of the chip. At this time, the chip will be installed back into the instrument, and the required kilometers will be displayed; The simplest way to return to zero is to directly replace a new instrument. The traditional speedometer is mechanical. A typical mechanical odometer is connected to a flexible shaft. There is a wire cable inside the flexible shaft. The other end of the flexible shaft is connected to a gear of the transmission. The gear rotation drives the wire cable to rotate. The wire cable drives a magnet in the cover ring of the odometer to rotate. The cover ring is connected with the pointer and the pointer is placed at the zero position through the hairspring. The speed of the rotation of the magnet causes the change of the magnetic force line, The balance is broken and the pointer is driven. This speedometer is simple and practical, and is widely used in large and small cars Most cars use speedometers with electronic sensors without flexible shafts. One common method is to obtain signals from the speed sensor on the transmission and deflect the pointer or display the number to indicate the speed of the car through the change of pulse frequency.
First, make sure that the variable speed gear is open.
1. After the variable speed gear is turned on, all programs currently running will be listed;
2. Select the program you want to change speed, and click "Add" to add it to the "Speed change process" box on the right;
3. Drag the speed adjusting lever to make it slow to the left and fast to the right;
4. Adjust to the appropriate speed.
Get a Quote / Info