vdo water temp gauge installation

• 2023-04-18

Install the VDO instrument water temperature gauge in the position you want to install and ensure that it is securely installed. Then, install the pointer on the instrument water temperature gauge and ensure that it is securely installed. Finally, tighten the pointer to ensure its secure installation. The VDO water temperature gauge refers to the water temperature, which represents the temperature of the coolant. However, it also indicates the temperature of the engine. After all, the coolant is used to cool the engine, so if the water temperature is too high, the engine cannot function properly. Conversely, if the water temperature is too low, it is also a significant factor in high fuel consumption. Antifreeze is not only used for antifreeze cooling. 

The characteristic of VDO water temperature gauge: It also serves as insulation for your engine. Generally, the water temperature is around 80 degrees Celsius, which is considered normal. In winter, it will be slightly lower. If the water temperature exceeds 90 degrees Celsius and does not drop, it must be stopped immediately. Turn off the engine and check the temperature of the engine cooling water tank. The normal temperature is usually 85 to 90 degrees Celsius. Before driving, you should first check the water temperature gauge. If the temperature exceeds the limit, it will cause the engine to overheat and damage the engine. 

By using a VDO water temp gauge, the temperature status of the engine can be monitored at all times. Generally, vehicles should be equipped with a water temperature gauge. If there is no VDO water temp gauge, the vehicle will be equipped with an alarm for excessive temperature, which will alert the driver to the overheating of the engine. Boiling water in the water tank can also cause burns during maintenance, so it is important to pay attention to the water temperature at all times. The car VDO water temp gauge is a current instrument that displays the temperature of the engine water tank to the driver. If the water in the water tank is low or empty, the temperature of the engine will be particularly high after running for a period of time, which can seriously damage the engine and reduce its service life. If the water temperature sensor malfunctions, the circuit of the water temperature sensor is damaged and cannot function properly, resulting in the water temperature light not coming on.