English 
what speedometer gear do i need
The key to driving a manual transmission car is to shift gears. The key is to shift gears in time according to the driving speed of the car, and to be fast and accurate, so as to drive more freely. First, let's take a look at the speed matching and gear introduction of 12345 in the 5-speed manual transmission.
Gear 1: used when starting normally or climbing a steep slope. Using this gear, the speed is generally 10 km / h;
Second gear: the excessive gear for accelerating after starting, or when driving at a low speed or climbing a steep slope, the speed is generally 20 km / h;
Third gear: this gear is used when the speed is 25-40km/h, and it is often used when driving in urban areas;
Fourth gear: use this gear when the speed is 40-60km/h;
Fifth gear: this gear can be used at a speed of 60km/h.
Manual shift
Generally speaking, the vehicle shifts to gear 1 and then moves forward to gear; Shift to gear 2 and push it to the left and then to gear down; Shift into gear 3 and push straight up on the basis of returning to neutral gear; Shift to 4th gear and push it straight down on the basis of returning to neutral gear; Shift into gear 5, push it straight to the right and then push it upward (refer to the gear identification of your vehicle for details).
Manual shift skills:
When shifting gears, the clutch and accelerator should be well matched. When the clutch is pressed low and tight, release the accelerator pedal, and then quickly shift to the corresponding gear. Release your hand immediately after shifting. Don't put it on the shift lever (commonly known as the shift target) for a long time, otherwise it is easy to damage the shift lever. For manual transmission vehicles, keep in mind the principle of "accelerating before increasing gear and decelerating before reducing gear". Before increasing gear, "bang" the accelerator to raise the speed first, and "close" the accelerator to lower the speed first before reducing gear. Before shifting gears, the clutch pedal must be pressed to the bottom, and the operation of the gear lever should be light, fast, soft and accurate.
Get a Quote / Info