English 
2000 dodge dakota voltage gauge intermittent
The reasons for the abnormal instability of the 2000 dodge dakota voltage are as follows: the contact point between the generator stator and the carbon brush is dirty , resulting in the instability of the excitation voltage, and the output of the alternating current is also unstable. The generator voltage regulator is faulty If the generator regulator is out of control or the detection voltage circuit is abnormal, the generator generation voltage will be too high (the higher the speed, the higher the voltage). If the voltage is not too high, the generator will overheat, the battery will have a fever, the bulb will burn out , and the main charging line will be burnt out. In serious cases, the battery will be inflated, blown up or even scrapped, the charging line will be on fire, and the computer board will be burnt out.
It is normal to jump between 12.5V and 14.5V! However, if the runout is large, it means that the voltage regulator of the generator is faulty and the output voltage of the generator cannot be stabilized. If the runout is large or the voltage is high, some electrical equipment will be damaged! It is recommended that you go to a professional repair shop for testing. Specific faults need to be tested on the vehicle.
Treatment method of poor power supply of automobile 2000 dodge dakota battery , this will make the voltage gauges work properly.
1.First, regular maintenance The battery also needs regular maintenance. If the power supply is poor, do not use the power supply before starting the car.Such as electric air pump, audio, warning light, electric window, etc. Don't turn off the engine immediately after starting the car, because the battery has just started and uses up a lot of electricity , and has not fully recharged enough electricity. The extra power consumption will only make the battery power insufficient, make it difficult to start, and shorten the battery life .
2.Secondly, reasonable use In addition , in the process of daily use, do not let the current flow in and out, because this will lead to aging of the battery. The performance change of the battery has a certain process. In daily use , attention should be paid to inspection and maintenance, and abnormal battery quality degradation should be found in time, so as to solve the problem immediately.
Get a Quote / Info