Menu

harley digital oil temp gauge check oil level

How to Harley digital oil temp gauge check oil level:

At the very bottom of the motorcycle engine there is a screw cap. Unscrew this screw cap. The oil will come out. Then unscrew the oil hole screw, kick the starter lever several times repeatedly, and the oil will leak out.

How to check Harley oil dipstick

1. Find the handle of the oil dipstick in the engine compartment and prepare a paper towel. Pull out the oil dipstick and wipe off the oil stuck on the tip of the dipstick with a paper towel. At this time, by the way, see where the scale of the oil dipstick is (usually there are two scales of MIN and MAX).

2. Insert the cleaned oil dipstick back, insert it to the end, and then pull it out. This time the oil sticking to the end of the dipstick can be used for observation.

3. Observe the oil stuck on the oil dipstick, and you can know where the highest point of the oil in the engine is.

4. If the position of the engine oil level is in the middle of MIN and MAX, it is the most ideal position, which proves that the amount of engine oil in the engine is very suitable.

Dipstick

Method 1: Use the oil dipstick to check the engine oil of the motorcycle 1. Generally, the oil dipstick is inserted and then taken out, rather than tightened and installed, and then taken out for inspection, as long as the oil level is between the upper and lower scales. If the engine oil is in zone A, you cannot refuel; if the oil is in zone B, you can refuel; if the oil is in zone C, you must refuel. Notice:1. Area B is what we usually call the pitted area, area A is from the top of the pit to the bend of the oil dipstick, and area C is from the bottom of the pit to the bend of the oil dipstick. 2. When the engine is running under severe conditions, the oil level should be kept in zone A, but not beyond zone A.

Method 2: For motorcycles without an oil dipstick, there is generally an observation hole at the bottom of the crankcase, from which the amount of engine oil can be judged. If it is an oil window inspection, as long as the oil level is kept between the lower line and the upper line of the oil window

Get a Quote / Info