English 
how to add a level gauge to a water tank on a sailboat
The liquid level inside the tank cannot be seen from the outside of the container, so some instruments need to be added to help people easily see the liquid level inside, so as to realize the functions of high and low liquid level alarm and water pump control. Some customers asked, how to add a liquid level gauge to the water tank on the sailboat? In this way, it depends on several factors of the on-site water tank. Whether the height of the water tank and the water temperature in the water tank need to be displayed on site or with high and low liquid level alarm function, and the liquid level in the water tank needs to be transmitted to the monitoring room for remote display and control.
The change of liquid level makes the floating barrel slide up and down along the electronic tube. At the same time, the magnet in the floating barrel drives the magnetic reed switch at different positions in the electronic tube to make the electronic signal of the internal circuit change immediately, and then the change is fed back to the instrument through the wire, and the instrument pointer swings to display the correct liquid level. The buoy is clamped and clamped with one end of the connecting steel wire, and then the other end of the connecting steel wire is installed in the two guide pulley boxes which are installed in advance, and is connected with the heavy hammer pointer, clamped and fixed with the wire clamping chuck. Finally, the guide pulley support is adjusted to make the connecting steel wire vertical and horizontal, so that the buoy moves flexibly on the guide steel wire, and has the phenomena of light sliding, no sticking, twisting, knotting, rolling or damaging. Note: master the required length of steel wire. The buoy liquid level buoy is clamped and clamped with one end of the connecting steel wire, and then the other end of the connecting steel wire is installed in the two guide pulley boxes which are installed in advance, and is connected with the heavy hammer pointer, clamped and fixed with the wire clamp, and finally adjusted the guide pulley support, so that the connecting steel wire is vertical to the horizontal, so that the buoy moves flexibly on the guide steel wire, has light sliding feeling, no stuck, twisted, knotted, and so on. Rolling or damage.
In the above practice, the water tank on the sailboat is commonly equipped with liquid level gauge. If you need more liquid level for your own convenience, you can contact Nanjing Hemu International Trade Co., Ltd. The company has a professional technical team to design suitable and easy-to-use liquid level products for customers.
Get a Quote / Info