English 
rudder angle indicator sender
Hot sale rudder angle indicator with sender. Sensors or senders for detecting changes in rudder angle. According to the query of relevant information, as rudder angle is one of the important parameters for hydraulic rudder control of ship heading, the change of rudder angle directly affects the ship's heading direction. Therefore, in order to achieve precise control of rudder angle, it is necessary to use sensors to detect rudder angle changes and transmit the detected signals to the control system, in order to achieve precise control of hydraulic rudder.
To check the quality of a boat's rudder angle gauge, you can do the following: 1. First, connect the rudder angle gauge to two multimeter. 2. Next, use only the resistance range to connect the initial pole of the forward voltage. 3. Whether the last extremum is consistent to prove good or bad.
The four wires of rudder angle indicator are connected as follows: 1. The cab and its four rudder angle meters have the dimming function. The two wing rudder angle meters have their own dimming devices, and the two rudder angle meters' dimming potentiometer in the cab are connected according to the voltage division connection. 2. Before powering on and debugging, remove all the wiring terminals of the rudder angle meter, measure and confirm the DC24V power line and rudder angle signal line, connect the DV24V power line, and keep the rudder angle signal line temporarily suspended.
The boat’s or ship's autopilot rudder angle has been constantly warning, possibly due to a sensor malfunction in the rudder angle gauge. Autopilot is one of the most important equipment for ocean going ships, which automatically controls the direction of the ship. Its performance directly affects the maneuverability, economy, and safety of the boat’s or ship's navigation. The constant alarm of autopilot yaw is a sensor fault, and the solution usually requires replacing the sensor. Inconsistent adjustment of rudder angle indicator and meter: rudder angle indicator does not rotate: check power supply and fuse. Jumping when the rudder angle indicator rotates: Check if the clearance between the rudder angle transmitter gears is too large. Our company can supply the rudder angle indicator and the sender. We have both black and white colors. 52mm and 85mm both have. The rudder angle indicator sender most customers need 0-190ohm , if you need other signal , we also can supply. Welcome to contact us with +8618855318266 or contact@he-mu.com
Get a Quote / Info