splitfire gauges oil temp gauge

• 2022-11-17

The oil gauge display can be adjusted by the adjusting lever on the instrument. A popular water temperature gauge is displayed on the dashboard. The thermometer is a digital instrument, 50-130 ℃. The fuel gauge is displayed in digital form, 0-1/2-1, 0 indicates insufficient fuel; 1 means sufficient oil; When the oil pointer points to the red line, add fuel.

The precautions for using the fuel gauge are as follows:

1. Do not add fuel when the alarm light is on, because the gasoline pump is in the fuel tank, and the heat dissipation and lubrication depend on gasoline. Too little oil will be detrimental to the normal operation of the oil pump and reduce its service life;

2. It is not recommended to top up when refuelling, because gasoline expands when heated, volatilizes into gasoline vapor at high temperature in summer, and requires space to contain it. If there is no space for too much, gasoline vapor and even liquid gasoline will enter the carbon canister for storage. When the carbon canister is full, it escapes into the air, which not only wastes but also pollutes the environment.

3. Indication deviation. After replacing the battery or gasoline filter every day, or even after parking for one night, when the vehicle starts again, if you notice that the oil dipstick pointer is lower than the previously displayed position, it may be considered as a fault. In fact, it is a normal phenomenon, because there is negative pressure in the oil tank when the oil pump is working, the corresponding oil tank volume decreases, and the oil level is high. In addition, the natural display is on the high side. When the temperature drops, the oil tank is opened, the pressure is released, and the oil level drops accordingly, so it is normal to display deviation. However, the deviation generally does not exceed one pointer width.

Splitfire gauges oil temp gauge:

Step 1: Quickly press the start button three times (do not step on the brake, otherwise the vehicle will start).
Step 2: LCD instrument displays complete information.
Step 3: Find the mileage update button at the bottom left of the instrument panel, press and hold the button for more than 10 seconds until Main Menu is displayed on the right side of the instrument panel, and then release the mileage button.
Step 4: Lightly press the mileage key to switch the selected object until Unlock is displayed, and then release the key.
Step 5: Find the Unlock option, and then press and hold the key at the lower left corner of the instrument for three seconds to enter the unlock interface.
Step 6: Enter the password, which is the sum of the last five digits of the vehicle identification code, to unlock.
Step 7: Find the temperature and press the button for three seconds.
Step 8: Coolant temp shows water temperature and Oil temp shows oil temperature.