English 
water tank level gauge australia
Australia people can buy water tank level gauge from China. Generally, when we open the machine cube behind the air exertion condenser, we can only see the upper cover of the water tank. Only by removing the cushion at the front of the vehicle can we easily see the position of the water tank. The water tanks are principally on the frontal wall. When you open the cover, you can see that the water drain switch between the frontal condenser and the electronic cooling addict is at the smallest end of the water tank, that is, the smallest end of the radiator. There's a water drain stopcock, which can be opened to drain water. It should be noted that exhaust must be carried out when the machine is cold; Don't open the water tank cover or drain stopcock when the coolant temperature is veritably high to avoid parboiling.
1. Open the water tank cover or expansion pot cover (different filling positions for different models). Start the car. If there is no water in the water tank, you can add some water first, then start the car and add water slowly;
2. Until there is water overflow, then close the cover tightly, and add a little throttle to raise the water temperature. Until the cooling fan works, when the fan stops, find a wet towel to cover the cover and slowly open it to see if it has not reached the standard water level. If it is not enough, just add it to the position. Among them, we must pay attention to;
3. Be careful when you open the water tank cover in a hot car. No matter what season, it's best to use freezing liquid. Water will produce water rust, which is not conducive to heat dissipation. Pay attention to exhaust air when adding water.
The water level in the water tank should be kept between min and max. if it is lower than min, it is necessary to add and must add coolant of the same brand and specification, or replace it all. The selection of coolant is mainly based on the local minimum temperature. Generally, it is full seasonal when leaving the factory. When the water level in the water level gauge is insufficient, there are two scales on the inner wall of the antifreeze kettle, one is Max and the other is mix, which means the highest and lowest. As long as the water level is kept in the middle.
Get a Quote / Info