English 
water temp and fuel gauge dont work on 2006 ats
The reason for the low indication of the 2006 ATS water temp gauge. One is that the thermostat is damaged and keeps a large cycle. Open the water tank cover and start the motor car in a cold car to observe the cycle speed. If it is soon, the thermostat will fail.
When the signal line of the water temp sensor is broken, the temperature signal cannot be transmitted to the instrument, so the temp cannot be displayed. The signal line needs to be reconnected. The water temperature sensor fails. When the water temperature sensor fails, the temperature signal cannot be detected, so the water temperature cannot be displayed. The sensor needs to be replaced.
When the 2006 ATS instrument temp acquisition unit fails and the instrument temp acquisition circuit fails, the temp value cannot be collected and displayed; The instrument needs to be replaced. Instrument display failure. When the temp display module fails, the collected temp value cannot be accurately displayed, resulting in display error or no display. The instrument needs to be replaced.
There is no display to see if there is colored water under the car. Another thing is to open the engine room cover to have a look. There is no color water or steam coming out. Or there is no fourth when the belt falls off. If there is no fourth, it may be the temperature. The sensor is faulty or. Thermostat failure. Or the water channel is blocked.
Generally, if the 2006 ATS oil float is broken when the pointer of the oil gauge does not move. It is recommended to go to the repair shop to connect the two wires of the oil float. If the pointer of the oil gauge reaches the top, the oil float is broken. If it still doesn't move, check the circuit and instrument panel. There may also be a problem with the oil gauge circuit.
For some cars that have been used for a long time, it is likely that there is a problem with the oil float of the car. The oil float is what we usually call the oil level sensor. We can check whether the plug of the oil level sensor on the oil tank is loose, and observe whether the oil level sensor is stuck during the sliding process. It is recommended to go to the automobile maintenance center to connect the two oil float lines. If the pointer of the oil gauge reaches the top, it means that the oil float is broken. If the pointer does not move after just filling up the fuel, it may be because the oil float is pushed above the fuel tank by the buoyancy of the oil. When the vehicle starts to consume fuel, the oil float drops and the pointer of the oil gauge rotates with the sensor.
Get a Quote / Info