atv water temp gauge

• 2022-10-17

We have atv water temp gauge , it is 52mm . The atv water temperature gauge can intuitively display the working temperature of the engine water tank, so as to ensure that the engine works within a suitable temperature range. Too high or too low will affect the performance of the engine. Generally, the normal water temperature of a car is about 90 degrees (of course, different brands of cars have certain differences). The water temperature gauge with the temperature value clearly marked can clearly see the real-time water temperature. However, some water temperature gauges only have scales but do not display values. The normal temperature should be about 90 ℃. Once it is too high or too low, it may rise or decrease rapidly. That's all wrong.

If the atv temperature is too high, it may be caused by the following reasons: When the vehicle is running at high speed, the heat generated by the heat spreading fan can not be transferred to the antifreeze solution in time, which will affect the heat dissipation, and then cause the temperature of the antifreeze solution to rise, resulting in problems such as boiling! In this case, if you are driving, reduce the speed first. Check whether there is a problem with the fan. If so, repair it in time. Don't wait for the pot to boil before going to repair it. Coolant leakage will cause its temperature to rise. At this time, check whether the coolant leaks! If yes, the leaking pipe should be repaired quickly. If not, add coolant of the same brand in time! It is not recommended to add water, especially in winter. Even if there is no fault, the coolant will be diluted. Once the water pump is in trouble, the water circulation on the heat conduction side of the engine cannot be carried out normally. This will lead to the failure of the engine cooling system, and the "boiling pot" phenomenon will occur! It must be discovered and solved in advance. In general, there is a problem with the water pump, which may be the bearing locking or the shutter wheel damage! It is unlikely that the bearing is locked. If the shutter wheel is broken, just replace it.

The main reasons for low water temperature are as follows: The cause of low engine water temperature is generally the damage of thermostat or the constant rotation of cooling fan.