how to set the yamaha fuel level gauge for aftermarket sender

2022-02-23

The gasoline motor unit is composed of a gasoline engine and a generator, which is driven by the gasoline engine to convert the heat energy of fuel (gasoline) combustion into electric energy. In the cylinder of the gasoline engine, the clean air filtered by the air filter is sprayed with the fuel injection nozzle the injected high-pressure atomized gasoline is fully mixed. Under the upward extrusion of the piston, the volume is reduced and the temperature is reduced the temperature rises rapidly and reaches the ignition point of gasoline. The gasoline is ignited, and the mixed gas burns violently the product expands rapidly and pushes the piston down, which is called 'work'. Each cylinder is arranged in a certain order. When doing work, the thrust acting on the piston changes into the force driving the crankshaft through the connecting rod.And drive the crankshaft to rotate. The brushless synchronous alternator is coaxially installed with the crankshaft of the gasoline engine.The rotation of the gasoline engine can be used to drive the rotor of the generator, and the principle of 'electromagnetic induction' can be used,The generator will output the induced electromotive force and generate current through the closed load circuit.

How :
1. The exhaust is toxic. Do not use the generator in a closed place.
2. Extremely flammable
(1) Do not smoke when refueling, and keep away from the fire source.
(2) Please note that the generator must be turned off when refueling.
(3)Please note that during refueling, do not overflow or spill fuel on the engine and muffler.
(4) Please keep the engine upright when operating or moving. Engine tilt combustion the oil will leak from the carburetor and the oil tank, resulting in danger.
(5) Do not cover the dust cover when working.
(6) When handling, hold the handle (handles on both sides).

3. Prevent electric shock
(1) Do not use in rain or snow.
(2) Do not touch the generator with wet hands.
(3) Connect the ground wire of the machine with the grounding terminal, and connect its end to the underground grounding terminal the grounding electrode and the grounding terminal are located on the side and placed at the battery.

4. Attention shall be paid to the extension cable. The surface of the extension cable shall use rubber with toughness and elasticity rubber cover.