English 
kus water level gauge wiring diagram
The connection of the KUS water level gauge wiring diagram is very simple. Just open the junction box, and then you will see two terminal blocks with positive and negative poles, which can be directly connected with 24V signal power supply. The floating ball liquid level gauge is a widely used continuous measurement instrument. After opening the junction box of the float level gauge, you can see a row of terminal blocks. There are positive and negative terminals on the left and right. You only need to connect the positive and negative terminals on one side. Float level gauge is a liquid level measuring instrument, which has simple structure and convenient installation, and is widely used in the field of liquid level measurement.
Replace the water level gauge tank car water level gauge:
1. Carefully open the eyepiece micrometer package, unscrew the eyepiece, install it, and see a clear upright image in the field of vision.
2.Open the package of the bench scale, carefully take out the bench scale (also known as the scale) and place it on the microscope stage.
3.Follow the normal operation steps to see the scale line of the bench scale and the black standard line in the field of vision.
4.Adjust the eyepiece micrometer and bench scale to make all the scale lines of the eyepiece micrometer and bench scale coincide as much as possible.
5.Count the number of squares of the ruler represented by the line close to the graduation line of the eyepiece micrometer and the zui of the ruler under this multiple.
6.The number of squares counted X 10 μ m. It is the scale length of the eyepiece micrometer.
7. Divide the current length by the total number of grids of the eyepiece micrometer to get the length represented by each grid of each scale under this multiple.
It is very convenient to remove the water tank level sensor. First, drain the water in the tank before removal, then raise the rear of the car and support it with a support stand, and then remove the relevant parts. Pay attention to plugging the hose nozzle and oil outlet of the fuel tank with a clean rag. In this way, the water tank level sensor can be removed. If there is a fault, it should be replaced in time.
Get a Quote / Info