water temp gauge in 79 corvette does not work
The correct method for the immobility of the automobile 79 corvette water temp gauge. First, check whether the wire head is broken and loose. If so, the water temperature sensor instrument is broken. You can unplug the water temperature sensor and put the plug on the wire. Open the key and check the thermometer on the instrument every time you turn it. If the water temperature sensor is broken, do not replace the instrument. The power line of the water temperature gauge is disconnected, the electric heating coil of the water temperature gauge is burnt out, and the electric heating coil of the water temperature gauge sensor is burnt out or has poor contact. The wire of water temperature gauge sensor is improperly connected or disconnected. The voltage regulator that provides stable power to the water temperature gauge circuit is damaged. Try it. The heater is hot. And the temperature of touching the upper tube and the lower tube is the same. It is recommended to check whether there is a thermostat. After confirming that there is no problem, consider the sensor, circuit and water temperature gauge. The thermostat should be broken. The thermostat is always open and the coolant is always in a large circulation state. It's better in summer, but it's hard to get water temperature in winter.
It may be that the 79 corvette water temperature gauge is faulty, the critical point in the thermometer is damaged, and the water temperature gauge is old due to its long service life. Check whether the circuit is loose and the engine is defective. Or the sensor is broken, you can replace it with a new one.
When it comes to the water temperature sensor of a car, many car owners will think of the water temperature meter of the car, which is also very normal. If the vehicle water temperature sensor does not work properly, how to repair it? The water temperature sensor is very important. If the water temperature of the vehicle is too high, it may cause the overall temperature of the vehicle to rise and make the engine stop working because of the high temperature. Therefore, if you find that the water temperature sensor does not work properly, you should immediately drive the car to the 4S store and let professional staff repair it. If you are a person in an auto repair shop, you can choose to buy our water temperature sensor, which is good in quality and low in price.
Get a Quote / Info