yamaha viking water temp gauge

• 2023-03-21

Motor yamaha viking can install a water temp gauge. It can check the water temp to make safe driving. Is the water temperature of the car fast or slow. There are actually two reasons for the fan to turn on when starting a cold car: The first reason is that there is no problem with the cooling system of your car, except that the air conditioning was not turned off the last time the car stalled.  "When the air conditioner operates again , it will cause the fan to rotate to make the condenser work.". The second reason is that there is a problem with the water temperature sensor , which causes the engine computer to not recognize the water temperature signal, leading to the engine entering a failure mode .

The idle water temperature is low when running normally . This situation is very normal , and it is not a mechanical failure , so it is not too much to worry about . Due to the lack of wind power to dissipate heat when idling , the water temperature will remain around 90 degrees Celsius , which is very stable . If you drive yamaha viking on high speed for a long time , the wind force during driving will effectively improve the heat dissipation effect of the intercooler , so the water temperature will decrease somewhat . If the weather temperature is relatively low, the range of water temperature drop will be greater.

The yamaha viking engine coolant temperature is not as low as possible , nor is it as high as possible . It should be within a certain range . The normal temperature is 90 ℃ in the center of the pointer . The water temperature gauge will be displayed on the instrument panel . There is a pointer on the water temperature gauge , and the position indicated by the pointer reflects the temperature of the engine coolant . When the yamaha viking engine is started , the pointer should be at the low temperature position before the coolant has been heated. As the yamaha viking engine runs and the coolant temperature increases , the pointer gradually moves to the normal operating range . If the pointer remains in a low or high temperature position and does not move within the normal range, it may need to be repaired or replaced.