yanmar water temp gauge

• 2023-07-12

Now, without a water temp gauge, the yanmar driver can only judge roughly whether it works normally, but can't know the specific situation. If the yanmar indicator light shows green or blue, the driver can only know that the yanmar water temperature is relatively low , but they don't know how low it is, they can only drive carefully. If it was red at the beginning , would the water temperature be normal after the driver changed the driving mode and turned off the red light? In fact, it may not necessarily be the case, as this may lead to drivers making mistakes in their judgment during driving. In addition, the warning light usually lights up when the yanmar water temperature reaches 105 degrees Celsius, and the normal operating temperature of the engine should be between 85 and 95 degrees Celsius. When the yanmar temperature reaches 100 degrees Celsius, the temperature is actually too high, but the yanmar indicator light does not remind you. This is already considered an abnormal working state, which must give the driver the wrong signal. So the water temperature gauge is quite installed.

The parameters on the yanmar engine are the most accurate. We can purchase an OBD box and plug it into the car's OBD interface to see most of the engine's operating parameters, including the engine's water temperature value . Nowadays, most cars are equipped with not only yanmar water temp gauge , but also simplified other instruments, such as oil pressure gauges. Drivers can judge the engine's condition based on the oil pressure . If the yanmar oil pressure is relatively low, it indicates that the engine is wearing heavily . However , if the yanmar oil pressure is relatively high, it indicates that the viscosity of the oil is too high.

The yanmar engine coolant temperature is not as low as possible, nor is it as high as possible. It needs to be within a certain range, and the normal temperature is 90 at the center of the pointer. After the vehicle starts, the temperature of the antifreeze rapidly increases. After the yanmar pointer reaches the central position, the temperature of the heat exchange equilibrium antifreeze no longer rises. In most cases, it is best to start when the temperature reaches the middle position, which is also one of the reasons for preheating the vehicle before starting.