autometer water temp gauge wiring

• 2023-03-17

About the autometer water temp gauge wiring , select a position to place the autometer water temp gauge, then fix it, connect the wire to the sensor and ground it. After installing the water temperature gauge, you can observe the working state of the machine at any time . If the temperature reaches 98 or 99 degrees and the electronic fan does not start , turn off the engine and open the machine cover . It is better not to turn on the air conditioner for a long time in summer. If it is not beautiful enough, you can also add turbine pressure gauge, tachometer, etc. In any case , the higher the instrument is installed .

The autometer water temp gauge can visually display the working temperature of the engine water tank, so as to ensure that the engine operates within a suitable temperature range . Too high or too low will affect the engine performance. The normal water temperature of the general car will be around 90 degrees (of course , there are certain differences between different brands of cars). The water temperature gauge clearly marked with the temperature value can clearly see the real-time water temperature, but some water temperature gauges only show the scale without the value . The normal temperature should be around 90 ℃ . Once it is too high or too low, it will also rise or fall rapidly. That is problematic.

When the cold car starts, the autometer water temperature is low, and then slowly rises . Generally, the vehicle will automatically control its temperature to achieve balance when it is heated to about 90 degrees Celsius. At this time , the autometer engine's working efficiency is the highest. If you find that the autometer water temperature is higher than the scale you normally see, you should suspect your cooling system . If it is close to the right side of the meter head , it should stop immediately, at least wait for it to cool down before driving , and get out of trouble as soon as possible. It can display the autometer water temperature of your car from time to time to prevent the engine body from being damaged by dry burning. It can prompt you whether to add water. So , the autometer water temp gauge can help us check the auto more carefully .