faze water temp gauge

• 2023-09-12

There are two design forms of water temperature meters, one is the pointer type, which is a traditional water temperature measurement meter, and the other is the digital display type. The digital display type is a new type of water temperature measurement meter that directly displays the digital temperature, but their function is the same. Generally, the normal water temperature for vehicles is around 90 ℃. The faze can use the both pointer or digital type. What should I do if the pointer is between H and C and becomes high or low? The faze dashboard can indicate various indicators of the vehicle, reminding you of oil pressure, fuel volume, vehicle speed, engine speed, lighting, maintenance intervals. If there is a fault, the corresponding fault light will light up, and the water temperature gauge will remind you of the faze coolant temperature. If the water temperature is too high or rises too fast, you should stop and check.

Treatment method for high water temperature: If the problem of high water temperature caused by coolant loss is found, a small amount of distilled water can be added for emergency use (please do not open the water tank cover during high temperatures, as there is a risk of scalding); For the problem of high water temperature caused by vehicles driving for a long time, you can pull over, turn on the hazard warning lights, and then let the vehicle naturally cool down; If the Computer fan is damaged, find the nearest repair shop for repair as soon as possible; When disassembling a damaged thermostat, the small circulation should be blocked to ensure that all coolant is dissipated by the water tank. 

False high temperature. Reason: Due to poor grounding between the engine and the car frame, the feedback value of the water temperature sensor is inaccurate, resulting in false indication of the water temperature gauge. The fault phenomenon is that regardless of whether the car is hot or cold, the water temperature rises very quickly after landing, and is generally most obvious when the headlights or blower are turned on again; Or turn off the headlights and blower, and the water temperature will immediately drop. Suggest finding a professional electrician to inspect or doing it yourself. When doing it yourself, you only need to connect two wires from the negative pole of the battery to the engine and the car frame for grounding.