gauges not working on boat

• 2023-02-17

The pointer on the instrument panel of the boat does not work because the gear signal is lost to display the gear. It will also appear after the battery is dead. You can ask the after-sales service personnel to repair it .

Different ships or boats or marines have different instruments. The conventional instruments of ordinary ships include speedometer, tachometer, oil pressure gauge , etc . Various indicators or warning lights are made under the cover of the boat's dashboard , such as coolant level warning light , fuel level indicator light , washer level indicator light , charging indicator light , transmission gear indicator light , etc .

What's the matter with the instrument cluster indicator lights all on? When the ship was driving, it suddenly found that a fault light on the dashboard was on, which inevitably made many people panic, worried about whether there was a problem with the boat , and afraid of a safety accident.

Engine fault lamp: the engine indicator lamp mainly displays the working status of the engine system. When the ship starts , the vehicle has a self inspection process . After the ignition switch is turned on, the indicator light comes on briefly and then goes out. If the indicator light stays on , it indicates that the engine system has failed and needs to be repaired in time . Water temperature indicator : insufficient coolant and electronic fan fault can cause this fault. When the fault light is on, stop the ship for inspection at the first time. Low coolant level warning lamp: when the coolant is insufficient , the engine water temperature will be too high , causing damage to engine parts . So once the owner finds that the coolant is insufficient , he should add it in time .

It should be checked whether all the boat gauges pointers not working or the pointers of a certain meter cannot move . If all the pointers cannot move, it may be that there is a problem with the power supply of the instrument. It is necessary to check the fuse. If the fuse is OK , check the power supply circuit on the back of the instrument . If a meter stops moving , the shift should check the sensor that controls the meter , and check whether the dial in the meter is broken .