English 
how to fuel level if gauge not working
The solution to the problem of car fuel gauge failure.
1: The pointer of the oil gauge does not move, mostly because the oil float is broken,It is recommended to connect two oil slick lines to the repair shop.
If the pointer of the oil gauge reaches the top, the oil float is damaged bad. If the test line and dashboard still haven't moved. If just fill up the oil pointer does not move, that is, the oil float is basically pushed to the top of the car fuel tank by the buoyancy of the oil, and the pointer connected to the sensor will not move. When a little fuel is consumed, the slick will drop and the needle will move with the sensor 2:1. Start to check whether the battery is charged, there is no problem when the gear display and headlights are on.
2.When there is electricity, it is necessary to detect the oil level sensor, commonly known as the oil level. If the oil gauge responds, it's a problem with the float, if the float's two wires are shorted by wires.
3. There is a small chip sensor on top of the oil slick. It is possible that the gold fingers are dirty due to bad oil, so use an eraser to wipe them.
The fuel gauge in this car is broken.
Solution: The fuel gauge is inaccurate.
1: The oil gauge marks quickly and slowly.
This is a fairly common phenomenon. In most cases many models dropped fairly slowly in the first half, but after the necessary scale, dropped fairly quickly. in this case the key is related to the design of the oil pump that reflects the amount of oil. this kind of love the condition does not evenly reflect changes in gasoline consumption, and it is quite common to not replace parts in this situation. Achieving absolutely consistent changes is still very difficult
2: The oil gauge scale suddenly drops to zero. The pointer of the oil gauge is almost dependent on the oil level sensor, so the pointer of the oil gauge is an intuitive indicator showing the symptoms of the oil level sensor way. If this happens, there is a problem with the car's fuel level sensor. In this case, the oil level sensor may be dirty and need to be cleaned immediately. If the car is more than 5 years old, it is likely that the oil level sensor is physically worn out damaged and cannot continue to work normally.
3: The oil dipstick scale rises the key symptom of this situation is that the pointer of the oil gauge stays at a certain position, and even after driving a certain distance, the scale shows that the system actually rises. The key reason is that the connecting rod between the oil level sensor and the float is stuck, so that the float cannot be If it floats up and down normally, the sensor will not change, and the oil gauge pointer will stop at a certain position.
Get a Quote / Info