more important oil temp or water temp gauge miata

• 2023-09-15

The miata oil temp is the oil temperature, and the water temp is the coolant temperature. Generally, there is only one of the two on the instrument panel of a car miata . The miata engine temperature is first transmitted to the oil and then to the coolant, so these two indicators are the same. The miata Fuel gauge in other answers is another matter. Regardless of the manufacturer's design, the car water temperature gauge is generally marked with the two English alphabet C and H, or distinguished by white and red areas. C represents cold and H represents hot. If the water temperature gauge is close to H or the red danger area, and the water temperature alarm light is on in serious cases, it indicates that the engine coolant is too high. As shown in the figure, the car miata water temp gauge is all in normal condition. 

Car miata owners know that high engine water temperature is not good, but did you know that low engine water temperature also has its drawbacks, resulting in insufficient combustion of the engine mixture, reduced power, poor lubrication, and excessive emissions. The water temperature gauge of course refers to the water temperature, indicating the temperature of the coolant, but it also indicates the temperature of the engine. After all, the coolant is used to cool the engine, so if the water temperature is too high, the engine cannot work properly. Conversely, if the water temperature is too low, it is also an important factor in high fuel consumption. Antifreeze not only plays an antifreeze cooling effect , but also serves as insulation for your miata engine. Normally, the water temperature is around 80 degrees Celsius, which is considered normal. In winter, it will be slightly lower. If the water temperature exceeds 90 degrees Celsius and does not drop, it must be stopped immediately, turned off, and inspected . 

How many degrees can pneumatic angle seat valves withstand high temperatures? Generally, angle seat valves purchased in the market are written below 180 degrees. In actual use, when the temperature reaches 150 degrees, the filling pipe of the angle seat valve begins to leak externally or the sealing gasket cannot withstand high temperature and directly deforms, resulting in leakage inside the valve body. Therefore, it is necessary to find a reliable company for high-temperature angle seat valves.