honda generator hour meter/tachometer kit

• 2023-02-14

Our tachometer gauge also shows the hourmeter. Can be used on Honda generator. The engine tachometer with an hour meter LCD display (diameter 85 mm) is set . There are four settings for the honda generator engine tachometer kit with an hour meter LCD display . Two adjustment methods of engine speed function "SELECT" - When the No. 1 end of the ignition coil is connected (the ignition system has only one ignition coil) , please enter the number of strokes (2 or 4 strokes) and the number of cylinders of the gasoline engine.

Note that this function is not applicable to vehicles equipped with honda generator engines . Function "PULSE" - select 1 . Input the set K value (pulse number of revolutions): inductive sensor , damping oscillation sensor , Hall sensor . Option 2: connect the W end of the generator on the vehicle equipped with a diesel engine, and connect the 1 terminal of the ignition coil (the ignition system has one or more ignition coils) on the vehicle equipped with a gasoline engine. There are two fine adjustment methods for the engine speed indication : function "ADJUST" engine speed indication fine adjustment (the pointer is adjusted in a continuous manner) or function "A" - engine speed indication fine adjustment (the pointer is adjusted in a percentage step).

The honda generator engine can exert the maximum power or maximum torque of the engine in a specific speed range, so the working number of the engine speed at this time can be understood by observing the engine tachometer . For example, if a car can output maximum power at 5500 rpm, then when accelerating rapidly or overtaking, press the accelerator hard, and start to shift when the honda generator engine speed reaches 5500 rpm. This will give play to the highest acceleration of the car. In normal driving, the engine speed of the general EFI vehicle is about 2200-2500. No matter which gear, the honda generator engine speed is kept at about 2200-2500, which is the most fuel efficient. The speed of the engine is related to the number of work done per unit time or the effective power of the engine, that is, the effective power of the engine changes with the speed. Therefore, when the effective power of the engine is stated, its corresponding speed must be indicated at the same time.