English 
how to read water level gauge
For the water level gauge, it is not necessary to read the liquid level, as long as the water surface can be seen in the level gauge during operation. Make sure that the readings can be estimated by 1/4，1/2, and 3/4. And E and F means empty and full. It is method of reading auto needle water level gauge. We also have digital water level gauge, it shows percentage , drivers can read the water level directly.
Generally, the water level gauge should be installed at the bottom of the lock water level, but it needs to be installed by hanging in the air. In this way, it is convenient to measure the depth of the water level and is not easy to cause errors. Put the probe of pressure water level gauge and data transmission cable into the bottom of water level logging or measuring container by means of suspension. If there is no silt, place the sensor at the lowest point of the water level. If there is silt, it should be higher than the silt surface, and the water level should be offset accordingly (if the replacement on site is complicated, put the water level gauge into PVC pipes and steel pipes with a diameter greater than the water level gauge, and fix the pipes in the water, and drill several small holes at different heights, so that water can enter the pipe smoothly).
Open the front hood to see if there is a shortage of water. If there is a shortage of water, fill the water tank. The instrument panel has a water level gauge and a water temperature gauge. If the temperature is too high, check the water tank. Most of the water tanks are short of water. The coolant flows in the radiator core and the air passes through the radiator core. The hot coolant cools because it dissipates heat to the air, and the cold air heats up because it absorbs heat from the coolant, so the radiator is a heat exchanger. The water in the car water tank is not added according to the time, but according to the surrounding environment and the use of the vehicle, the water level needs to be checked regularly, and many do not need to be added . If you have the water level gauge , it is easier , can read the water level in the driver room.
Get a Quote / Info