oil temp gauge to replace the clock on the 98 bmw r1100r

• 2024-03-12

When BMW measures the engine oil, oil temp gauge to replace the clock on the 98 bmw r1100r if the coolant temperature is not high enough. The engine speed will automatically increase. After the engine speed increases, the engine runs more smoothly. The more accurate the oil measurement is.Mainly from two aspects, one is due to the high engine temperature, which causes the oil to warm up quickly and quickly. 1. Thermostat, a thermostat is used to regulate the engine temperature. If the thermostat is damaged, the engine working temperature will be too high, which will cause the oil temperature to be too high. 2. If the water pump in the car's water tank is damaged, the coolant cannot absorb heat in a timely manner. If the engine temperature is too high, the oil temperature will also rise much faster. The second reason is that the engine oil itself cannot cool down. This problem occurs when the oil radiator is damaged, and the oil cannot drop to a normal operating temperature.

Measure the oil level and ensure that the engine speed increases normally.

Perfect working temperature: 90-100 ℃

Sub perfect working temperature: 80-90 ℃, 100-110 ℃

Imperfect working temperature: 70-80 ℃, 110-120 ℃

Temperature not recommended for continued driving:>120 ℃

This temperature is too low, which is not conducive to combustion and thus affects power; The temperature is too high, which poses a great challenge to various components of the engine, especially the oil seals and gaskets. So it's best for us to control the oil temperature between 90-100 ℃ when using cars, and occasionally it doesn't matter if it's between 100-110 ℃. One day, I had a fierce driving experience, and the temperature reached 120 ℃. However, after a while, the normal driving temperature will drop back, which is no problem. However, if the engine oil temperature reaches 110 ℃ or even 120 ℃ after driving the car for a while, we need to specifically check the following aspects:

1. Doubt whether the added oil is suitable and of qualified quality;

2. Check whether the oil quantity is sufficient, whether the oil has deteriorated or has too many impurities;

3. Whether the water tank is leaking and whether the antifreeze is low;

4. Is the electronic fan not working properly;

5. Is the thermostat working properly;

6. Is the antifreeze not circulating smoothly;

7. Is the water temperature sensor damaged or misreported;

8. Is the piston ring sealed well;

9. Whether the radiator is blocked;

10. Check if the grille is dirty or blocked;